Stand is a custom stand by TRUVU super thick plywood furniture grade. It was between the lines on the level when we placed it across all three axis.
The tanks a 185 truvu same thing in the lines on a 3 foot level, began to fill tonight and I took the water one inch over the stand lip to see I have about 2 mm of height difference in the water.
The stand has a solid flat wood bottom, so I'm not sure how to shim that.
Any one have any advice ?
Thanks
The tanks a 185 truvu same thing in the lines on a 3 foot level, began to fill tonight and I took the water one inch over the stand lip to see I have about 2 mm of height difference in the water.
The stand has a solid flat wood bottom, so I'm not sure how to shim that.
Any one have any advice ?
Thanks