Good luck. Some faucets have male inserts (threads are inside faucet head), others female(threads are outside of faucet head).
nope doesnt come out.
You sure? Didja put a channel lock/vice grip on it? Never seen one that didn't have a removable insert...
i unscrewed the aerator and there was nothing else in there to come out. the threads are inside the faucet
Exactly - once there are exposed/unused threads all that's left is finding an adapter that uses the same threads on the end that screws into the faucet bridged to whatever you're connecting. You may go ahead and change the faucet but good chance that your local hardware store could set you up if you walk in with the threaded aerator piece that you removed and whatever it is you're seeking to attach. Yes?
Exactly - once there are exposed/unused threads all that's left is finding an adapter that uses the same threads on the end that screws into the faucet bridged to whatever you're connecting. You may go ahead and change the faucet but good chance that your local hardware store could set you up if you walk in with the threaded aerator piece that you removed and whatever it is you're seeking to attach. Yes?
If his sink is like mine then maybe not. The internal threads are not any standard thread type/size that I have seen and even if there are the gap between the aerator threads and the inside of the faucet are so narrow that most adapters I've seen wouldn't fit. For me it's easier just to use the shower and the flow rate blows my bathroom sink away. Also less chance of the tub overflowing if it gets a little backed up.
My preferred place to hook my water changer will always be my utility sink downstairs. Flows like a fire hose and gets a massive siphon rolling but would need a 100' hose to reach the third floor.
If his sink is like mine then maybe not. The internal threads are not any standard thread type/size that I have seen and even if there are the gap between the aerator threads and the inside of the faucet are so narrow that most adapters I've seen wouldn't fit.
exactly! they were not standard threads. new faucet is on and water change done..
What's up, Sam! What are you up to these days?
If an aerator threads in then the right adaptor will. "Standard" in this context is a misnomer as all threads are some sort of "standard" machine thread unless they're hand carved in lower Zimbabwe or some other other such place lacking an export market for hardware. I assembled the adaptor I had in DC for what you're terming a "non-standard" fitting using off the shelf fittings from the local hardware store (True Value at 1623 17th St NW, Washington, DC 20009), and was able to do so because manufacturers worldwide use equipment that is designed to produce a limited number of specific thread sizes that in turn translates into a well-stocked local hardware store being able to fulfill virtually any and every request for any male/female thread size or combination thereof.
You are probably aware that "standard" in this context/country used to mean anything that followed the old British standards for measurement, whereas these days that "standard' has been largely superseded by the global shift to the metric system. Global manufacturing may not be universally harmonized as yet but it's close enough that there is no longer really any such thing as a "non-standard" fitting . Just saying.
Pleased the deed is accomplished, all's well that ends well.
There are a ton offered in eBay. I haven't tried them (no real pond set up yet), but I'm skeptical as to whether they'd work. Even if they do, they'd only work in the day time, since they have no batteries.Currently looking for a cheap solar-powered aeration option (no grid access), something considerably south of the grand that the latest green tech represents - obliged for any ideas/directions.