I have a 210 gallon aquarium (7' x 2' x 2.5') and tonight all of a sudden the 2 braces broke off and fell in the tank. The braces were at ~28 inches and ~56 inches. From what I have read, this could be a sign of aquarium bowing and impending failure, so I am draining half of the water and moving...
Does anyone here do any light welding? I currently have a 220 gallon tank that the 2 center braces are broken on. It's an older tank and no one seems to carry the top brace for it anymore. I was curious if someone could actually weld a top brace with the 2 center braces attached. I would need...
So I bring home my new tank last night get it set up filled it and notice the center brace is ripping apart. so I drained it back about half way and the tear closed up. What's the best way to fix it?
Will removing the top brace of a 55 gallon (long, I think) and then not resealing it so I can just slip it on and off, weaken the integrity of the tank?
I am looking for a ideas on how to make or what to use for a canopy for a 75G no brace. I have even considered making a faux brace just for the glass tops to sit on.
hello all looking to replace top brace on 55 gall tank where the center brace broke and the bows out in the center with water in it. looking for source to purchase tope frame brace altogether. Thanks in advance.
Just filled a 55g, and the center brace has slightly separated (i.e., broken) away from the back edge of the top frame. Does this mean the glass is bowing, or I am in some other danger of all 55g going on the floor??? :eek:
Thanks to a generous fellow CCA'er, I am the new owner of a used 55G. At some point in it's past it appears that the center brace was broken and removed. I filled it to find out if it held water and the good news is that it does. The bad news is that it bows about 3/4" in the center when...